Somfy TILT WIREFREE RTS Manuel d'utilisateur télécharger pdf

RTS Tilt WireFree Programming & Operation Instructions

New & Improved w/RTS

WireFree Tilt now joins the Somfy RTS motor offering.

Before you begin

Motors are shipped without limit switch settings and transmitter ID’s

Steps (1-6) must be completed to ensure proper shade programming and functionality.

Power should ONLY be connected to current shade being programmed. All other

shades should be disconnected from their respective power while programming is in progress.

While programming (step 4), shade should not be inactive for longer than 2 minutes

or motor will exit programming mode.

For Multi-Channel Transmitters (Telis 4, Decora 4)

STEP ONE

STEP TWO

Initiate Programming – (for use with Telis 1 & 4, Decora 1 & 4, Modulis or Chronis Timer)

The following illustrations and instructions represent the Telis hand-held remote, and

may also be applied to the Decora wireless wall switch and Chronis Timer.

1) Connect 12V battery wand or transformer to the motor

Motor should already be installed in blind.

Connect Power to Motor

Programming Instructions are for use with Telis 1&4, Decora 1&4, Modulis or Chronis Timer

NOTE: This step cannot be performed if the transmitter has

already been programmed (memorized) to blind.

TI N

B Y

DOWN

STOP

Telis Modulis Five Channel

(with tilt wheel)

CHANNEL

SELECTOR

LED

Channel

Indicator

Telis RTS Single Channel

(Standard)

STOP

DOWN

LED

Channel

Indicator

STOP

DOWN

CHANNEL

SELECTOR

Telis RTS Five Channel

(Standard)

LED

Channel

Indicator

STOP

DOWN

Decora WireFree Wall Switch

(Standard)

For Single Channel Transmitters (Telis 1, Decora 1, Modulis or Chronis Timer)

1) On the transmitter, press and hold the UP and DOWN buttons

simultaneously until the blind jogs (blind slats have a short

up and down tilt movement).

1) Using the channel selector, select the desired channel.

2) On the transmitter, press and hold the UP and DOWN buttons

simultaneously until the blind jogs.

SOMFY SYSTEMS, INC. 9/08 REV.2A

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Connect Power to Motor

RTS Tilt WireFree Programming & Operation InstructionsTMNew & Improved w/RTSTMWireFree Tilt now joins the Somfy RTS motor offering.Before y

Page 2 - STEP THREE

Tilt WireFree RTS Programming & Operation InstructionsTMSTEP FOURSetting Limits (Slat Positions)1.2.myPress MY (stop)Button3.4.myPress MY (stop)

Page 3

Press MY (stop)ButtonmyPress MY (stop)and UP Button4.3.3) Press the MY (Stop) button when the blind reaches the desired lower limit (slat position

Page 4

PrevioustransmitterProgram ButtonmyChannelSelectorNewtransmitterProgram Button Adding Additional Transmitters (Single Channel) 1) Using a papercl

Page 5 - STEP SEVEN

myPress and hold UP orDOWN Button1.1) Press the UP or DOWN directional button on the previously addressed transmitter until the blind slats reac

Page 6 - OPTION TWO

Press and hold My (stop) Buttonmy4.4) Press and hold the MY (Stop) button until the blind jogs. New Upper Limit (Up Stop Position) is now added

Page 7

1) Press the DOWN directional button on the transmitter. Blind will tilt to the pre-set DOWN limit.Press hold MY (stop) ButtonPress and hold DOW

Page 8

CSOMFY SYSTEMS, INC. 9/08 REV.2ATI NB Y

Commentaires sur ces manuels

Pas de commentaire

Somfy TILT WIREFREE RTS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Somfy TILT WIREFREE RTS. SOMFY TILT WIREFREE RTS User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Somfy TILT WIREFREE RTS